Some models available to label printing. CT-S281, CT-S2000, CT-S4000, CT-S801

The factory default setting of Label model printers is set as a label paper setting. The setting is optimized to our recommended paper. If you find a head dirty, please clean it. In order to adjust density, please try following points.

- Increase printing density by setting a memory switch. But too high setting shortens life of a head.

- Use a printing dense command. But it comes back to normal, if it is turned off.)

- Use a command on bold or double characters if you decorate characters.

- If above setting does not work, change to other paper because the trouble is caused by paper's material. (The paper's specification or deterioration under the environment)